-
Welcome to Auto Parts Forum
Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn.
Lisle 61860 Oil Filter Housing Torque Adapter
-
Similar Topics
-
By CALEPH Auto Parts
The car air filter is a vital component in the car engine intake system. Its function is to filter out dust, sand and other impurities in the air entering the engine to reduce the wear of these impurities on the internal parts of the engine and protect the normal operation of the engine. The performance of the air filter is directly related to the life of the engine and the fuel efficiency of the car.
There are two main types of air filters: dry and wet. Dry filters usually consist of paper filter elements, while wet filters may include oil bath filters, in which air passes through oil to filter impurities. In modern cars, dry paper filter elements are widely used because of their high efficiency and low cost.
The recommended cycle for maintaining and replacing air filters is usually 10,000 to 20,000 kilometers, but this may vary depending on the vehicle's use environment and driving conditions. In areas with poor air quality or dusty areas, more frequent replacement may be required. If the air filter is too dirty, it may cause insufficient engine intake, reduced power, increased fuel consumption, and even increased engine wear.
The process of replacing the air filter is relatively simple and mainly includes the following steps:
1. Turn off the engine and open the car hood.
2. Find the location of the air filter, which is usually on the side of the engine compartment.
3. Loosen the clamp or screw that fixes the air filter box.
4. Remove the old filter element and check whether it is damaged or excessively dirty.
5. Clean the inside of the air filter housing to remove dust and impurities.
6. Install the new air filter element and make sure it is properly placed.
7. Reinstall the air filter box and fix it.
In daily maintenance, compressed air can be used to blow dust from the inside of the filter element to the outside, but oil or water should be avoided for cleaning, as this may damage the filter element. If the filter element is already damaged or excessively dirty, a new filter element should be replaced.
Proper maintenance and timely replacement of air filters are essential to maintaining engine performance and extending its service life. Car owners should determine the best time to replace the air filter based on the recommendations of the car manufacturer and their own driving environment.
🔗Here are more products you want: link hidden, please login to view
💬Leave a message to tell us your needs, our professional team is always at your service!
-
By CALEPH Auto Parts
The car air filter (commonly known as air filter or air filter) plays a very important role in the car engine system. Here are the main functions of the car air filter:
1. Filter impurities:
It is able to capture dust, sand, pollen and other particulate matter in the air and prevent these impurities from entering the engine.
2. Protect engine components:
By filtering out these impurities, the air filter helps protect the components inside the engine, such as cylinders, pistons and valves, from wear and damage.
3. Maintain engine performance:
Clean air is essential for the efficient combustion of the engine. A good air filter ensures that the engine gets the right amount of clean air, which helps improve fuel efficiency and power output.
4. Extend engine life:
By reducing debris that can cause friction and damage, the air filter helps extend the life of the engine.
5. Improve fuel efficiency:
When the engine is able to work with clean air, it can burn fuel more efficiently, which can lead to better fuel economy.
6. Reduce Emissions:
A clean air filter can also help reduce harmful emissions, ensuring that the engine runs at its best and doesn't burn fuel in an incomplete or dirty manner.
7. Prevent Engine Knock:
Impurities can cause engine knocking or knocking noises, which are signs of inefficient combustion. A good air filter can help prevent this.
Regularly checking and replacing air filters is part of your car's regular maintenance to ensure these benefits are maintained.
🔗The air filter products here are suitable for you: link hidden, please login to view
💬Leave a message to tell us your needs, our professional team is always at your service!
-
By CALEPH Auto Parts
The car air filter is an important part of the engine intake system. Its main function is to filter out dust and impurities in the air entering the engine to protect the normal operation of the engine. Regular inspection and replacement of air filters is essential to maintain vehicle performance and fuel efficiency.
When to replace the car air filter?
Generally speaking, the recommended replacement cycle of the air filter is 10,000 to 20,000 kilometers, but this cycle varies according to the vehicle's use environment and driving conditions. If you often drive in dusty or poor air quality environments, you may need to replace it more frequently. For example, in areas with heavy sand and dust, it may need to be cleaned every 5,000 to 7,500 kilometers, while in severely polluted environments, it may need to be checked every 3,000 kilometers. If the air filter is blocked, the indicator light alarm should also be replaced immediately.
How to check the air filter?
1. Open the engine hood and find the location of the air filter.
2. Check whether there is dust accumulation on the outside of the air filter.
3. Gently tap or use compressed air to blow the filter element from the inside to the outside to remove dust.
4. If the filter element is black or damaged, or if there is too much dust after beating, it is recommended to replace it.
Steps to replace the air filter:
1. Determine the location of the air filter and open the engine hood.
2. Remove the screws or buckles that fix the air filter box.
3. Take out the old air filter and clean the dust in the filter box.
4. Install the new air filter and ensure that it is well sealed.
5. Reinstall the air filter box and close the engine hood.
Note:
During the replacement process, make sure to use a genuine air filter that matches the vehicle model.
Be careful not to damage the filter element when replacing it, and avoid contamination of the filter element by oil or other impurities.
Check whether the seal of the air filter box is intact. If it is damaged, it should be replaced in time.
Please check and replace the air filter regularly according to your vehicle usage and environmental conditions, combined with the recommendations of the vehicle manufacturer, to ensure the best performance of the engine and extend its service life. If you are not sure how to do it, it is recommended to consult a professional auto repair technician.
🔗For more automotive knowledge, please visit:
link hidden, please login to view 💬Leave a message to tell us your needs, our professional team is always at your service!
-
By Mighty Auto Parts
The post
link hidden, please login to view appeared first on link hidden, please login to view. The vehicle received a full service including an oil and filter change. The system was leak checked and the engine 43ehad good oil pressure. Two days later, the customer calls reporting a loss of oil pressure symptom. Mechanic A says…a defective oil filter is the cause of the loss of oil pressure. Mechanic B says…a […]
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view -
-
By Counterman
There is nothing simple about complex engine oil formulations. Effectively explaining to your customer how Valvoline’s Restore & Protect motor oil removes and prevents engine deposits may seem like a tough task.
Dr. Michael Warholic, global technology director for Valvoline Global Operations, emphasizes the importance of visual evidence
“Hey, look how this product performs,” said Warholic. “We have visuals showing that there’s a removal of deposits, that there is a reversing of the aging process in an engine. That’s a great case story to tell.”
Warholic talks with Babcox Content Director Jason Morgan about the formulation process that sets Restore & Protect apart. The process involves a balance of various additives and components, tested rigorously in both laboratory and real-world conditions. It also involves combining base oils, viscosity modifiers, and a unique blend of additives. These additives include detergents to clean deposits, friction modifiers to reduce engine strain, and antioxidants to combat the breakdown of oil components. The goal was to create a motor oil that not only prevents the formation of new deposits but also removes existing ones, effectively rejuvenating the engine.
“We wanted to do something different than everybody else,” said Warholic. “That’s what Restore and Protect does. It differentiates us from our competitors. It does something that no other oil does in the marketplace right now.”
Restore & Protect could be considered a new category of motor oil that bridges the gap between conventional oils and high-mileage formulations. While high-mileage oils are designed for older engines, Restore & Protect is suitable for both new and aging engines. Its dual function of preventing new deposits and reversing existing ones makes it a versatile choice for a wide range of vehicles.
This innovation is particularly valuable for engines operating under severe conditions, such as those used for towing or in high-traffic areas. The oil’s ability to handle these demanding environments while maintaining engine cleanliness offers a significant advantage over standard motor oils.
“There’s always engine oil. Formulating is a little bit about give and take. The engine is a very complex machine. You have different temperatures, different pressures. It is really a very interesting field when you start digging into it.”
“We do tons of data-driven testing. That’s what we live for.”
The post
link hidden, please login to view appeared first on link hidden, please login to view.
link hidden, please login to view
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.