Jump to content

  • Welcome to Auto Parts Forum

    Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn. 

     

Recommended Posts

Posted

rssImage-f0627b085127c28f8a8d245d38360428.jpeg

It used to be common for mechanics to rebuild certain components in the shop, including brake calipers, wheel cylinders, starters and alternators. There used to be a time when economically it made sense. The small components needed for a rebuild were inexpensive, and it ultimately didn’t take too long. Plus, all you could get was the rebuild parts, or go with new.

But the repair industry shifted away from rebuilding. Now, professional technicians rarely toy with the idea. But what about brake calipers? Does it make sense to rebuild them instead of replacing? Most of the parts are readily available. If the professionals don’t do it, why not? And, can it save money for a DIYer?

The knee-jerk answer for many is no. The main reason is time versus cost. Let’s face it: Remanufactured calipers are very reasonable in price. Companies that do this benefit from volume. Every part of the process from cleaning to inspection, machining and reassembly happens in volume, so they’re able to keep the costs low, yet produce a quality product. It’s difficult to justify the amount of time it would take, especially when you consider the cost of your labor.

Is it difficult to do? Not by any means. A brake caliper is possibly one of the easiest things to rebuild – even rear calipers with built-in parking brake mechanisms. It’s the same basic process (just a few more parts), so you just need to pay closer attention to how they come apart.

But, there are a few questions to ask. Do you have the means to clean and refinish it? Do you have the tooling to properly hone the piston bore? And then you need the seal kit and possibly a new piston. To match what you get with most reman calipers, add new slide pins, boots, pad shims, a new bleeder valve and new brake-hose sealing washers into the mix.

When you consider the time and effort involved, suddenly it starts to sound a little better to go with a reman or new, and the best part is, new calipers aren’t much more expensive than reman.

Why Rebuild?

With all that said, why would someone rebuild a caliper? Rebuilding can be fun and it’s a rewarding feeling. Even though it’s not cost-effective from a professional standpoint, for a DIYer it can save a lot of money. If it’s a project car and time is not of the essence, saving money is usually the name of the game.

Remanufactured calipers are always refinished, but maybe there’s a specific color you want the calipers to be. High-heat caliper paint is readily available in many colors, and if you’re going to paint them, the proper time to do it is when they’re disassembled.

In some cases, on older cars, reman or new calipers may not be available. There aren’t any cores to rebuild, and it’s cost-prohibitive to produce new ones, so you may have no choice on some restorations. There also are cases where a specific type of caliper – whether it be the design or specific casting marks – may affect the originality of a car, and this also is an important part of the restoration.

There are plenty of reasons to rebuild a caliper, and there’s certainly nothing wrong with doing it. But, it’s safe to say that most are going to go with reman or new options unless the circumstance calls for using the original.

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By WiperTech008
      When Should You Replace Your Wiper Blades?
      Wiper blades keep your windshield clear, but since they’re made of rubber, they wear out with time and need to be swapped out regularly.  How long they last really depends on how often you use them, where you drive, and whether you take care of them. Watch for these signs that indicate it's time for new wipers:
      Streaking or Noise
      Notice streaks or that awful squeaking sound? Yep, it’s probably time for a new pair. For a temporary fix, clean the blades with vinegar or alcohol, but replace them as soon as possible.
      Visible Damage
      Check the rubber blades regularly for cracks, chips, or deformities. Any damage means it's time for new wipers.
      Age Considerations
      Standard wipers typically last 6-12 months
      High-quality blades with proper care can last 2+ years
      Frequent use or harsh conditions (sun exposure, dry wiping) may require replacement every 6 months
      Just a heads-up—if your car sits in the sun a lot or you use your wipers all the time, it’s smart to check them more often.
    • By LEarn492
      Hi i have a 2006 g35x that i just got. i put sport pads in the front becuase i used them on my old car and loved the extra power that they gave me. i need new rear pads too, my question is will putting sport pads in the rear mess up my car's handling or braking? like it won't mess with the brake bias, the system that alters brake pressure to each wheel, make my car more likely to fishtail or anything like that when i hit the brakes in a corner right? it'll just give me more stopping power? i'm thinking this as all the companies sell sport pads for rear too. anyone here done this before? any tips? thanks.
    • By Counterman
      Standard Motor Products (SMP) announced new additions to its electronic parking brake actuator program. The company said the parking brake actuator is one of the fastest-growing categories in the automotive aftermarket. Standard offers coverage for both import and domestic vehicles.
      Automakers now use electronic parking brake actuators on almost all new vehicles. These have replaced manually operated cable parking brakes. The new parking brake actuator plays a critical role in vehicle safety systems, according to SMP.
      SMP: Quality Engineering in Every Parking Brake Actuator
      Standard said its parking brake actuators are always 100% new and never remanufactured. They are engineered to match OE performance. These actuators integrate seamlessly with electronic safety systems.
      The plug-and-play design simplifies installation. Technicians do not need additional programming. Many actuators also include the correct O-ring and hardware for a complete repair.
      New Applications Cover Ford, Jeep, Subaru and More

      link hidden, please login to view has introduced new applications for millions of late-model vehicles. Coverage now includes Ford models like the 2023–22 Escape, Bronco Sport, and Maverick. SMP also added the 2024–23 Super Duty trucks. Other new applications include the 2024–22 Jeep Grand Cherokee and Ram ProMaster. Mercedes-Benz vehicles through 2023 and Subaru models through 2024 are now covered.
      SMP expanded its program to include additional Mazda, Audi, Volkswagen and General Motors vehicles.
      SMP Supports Distributors with Training and Tools
      “Standard’s parking brake actuator program is the most comprehensive in the industry,” said John Herc, vice president of vehicle control marketing at
      link hidden, please login to view. “In addition to industry-leading coverage, we are providing our distribution partners with training, marketing materials and key category insights to help them capitalize on the growth of this category.” Actuator Catalog Available Online
      Standard lists all parking brake actuators in its online catalog at
      link hidden, please login to view. The company also supplies listings through electronic catalog providers. The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By Counterman
      Motorcar Parts of America (MPA) announced the company has expanded its product coverage programs for starters and alternators, brake calipers, brake pads and brake rotors, with more than 120 new part numbers covering an additional 30 million vehicles in operation.
      The new part numbers are offered through QB, Quality-Built, Quality-Built Black Series and Pure Energy brands powered by MPA, which serve the professional installer market. A select list of late model part number introductions is available via the link below. A complete list is available by contacting a
      link hidden, please login to view sales representative. “Our Quality-Built and Pure Energy products continue to gain traction in the professional market and the new part number introductions highlight our ongoing commitment to proactively develop, catalog, and distribute products to meet the demand,” said Jamie Cook, senior vice president of sales and marketing for Motorcar Parts of America.

      link hidden, please login to view The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • By Dorman Products
      Easy way to replace battered ProMaster van door panels | Dorman 82546

×
  • Create New...