Jump to content

  • Welcome to Auto Parts Forum

    Whether you are a veteran automotive parts guru or just someone looking for some quick auto parts advice, register today and start a new topic in our forum. Registration is free and you can even sign up with social network platforms such as Facebook, X, and LinkedIn. 

     

Getting Familiar with the Fuse Box

Counterman
 Share

Recommended Posts

Counterman Contributor

Counterman

Posted
Posted

Every single component in a vehicle has a purpose – otherwise, it wouldn’t be there at all. As our vehicles have grown more and more complex, they’ve become more dependent on electrical systems to operate all of the creature comforts to which we’ve grown accustomed. There are hundreds if not thousands of feet of wiring inside today’s vehicles, with dozens of connections throughout.

These electrical circuits, as well as the components that draw power from them, need to be protected in the event of a short circuit or excessive current flow. That’s where fuses come in: They’re the first line of defense for electrical circuits. Fuses are the best (or at least the cheapest) protection we have for electrical circuits.

Fuses and Their Ratings

Fuses are designed to open an electrical circuit if current flow exceeds a given amperage. Inside the fuse is a small wire element that burns away if current flow rises above the rated maximum level. When the element burns away, the circuit is opened, protecting the wires and/or components from literally melting themselves.

The current-flow rating of a fuse is determined by the amount of amperage required to blow the fuse and open the circuit. This rating should be indicated on the fuse body, including a number to indicate the rated amperage followed by the letter “A” for amps. Fuses can easily be replaced, but if there’s an electrical short in the circuit, it will need to be repaired or the replacement fuse will immediately “pop” again.

Whenever replacing a fuse, you always should use the same amperage rating as the one you’re replacing. You never should “upgrade” to a 10A fuse just because the 5A fuse that was there before blew out. Doing so could damage wiring or connectors in the circuit that aren’t designed to handle that level of current flow.

Finding Your Way Around

There are a lot of fuses in today’s vehicles, so how do you figure out which one protects the circuit you’re working on? It’s usually a very simple matter of opening up the fuse box and reading the guide on the inside of the lid. Most of the time you’ll also find some sort of plastic fuse-removal tool that can be stored underneath the cover. Of course, needle-nose pliers will work in a pinch as long as you work carefully and don’t squeeze too hard.

The automakers all do a pretty good job of numbering all of the fuses and relays, and printing guides or tables underneath the fuse-box covers or lids. However, if you’re working on a vehicle built by the Ford Motor Co., you’ll need to work a bit harder to get the information you want. Ford tends to number its fuse panels, but the actual circuit descriptions are provided in the owner’s manual. If the manual is no longer present inside the vehicle, then you’ll need to reference the OE service information or a comparable repair manual to get the information you need.

If you need a quick and easy way to test for blown fuses, all you need is a test light. With the ignition key set to “OFF,” touch the test light to the small, exposed conductors on top of each fuse. The test light will light up if power is present, and should light up on both sides of the fuse. Then, repeat this test again with the ignition key turned to the “ON” position, engine “OFF.” Some circuits will only power on when the ignition is turned to the “ON” position.

The post

link hidden, please login to view
appeared first on
link hidden, please login to view
.

link hidden, please login to view

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Counterman
      Road to AAPEX S3, Ep10: Getting Our Bearings
      By Counterman
      This episode of the Road to AAPEX takes us to Grand Rapids, Mich., for a trip to Auto-Wares, where host Joe Keene learns about the company’s history, operations and distribution of auto parts. Auto-Wares works closely with manufacturers like BCA Bearings, a division of NTN, to ensure high-quality OE replacement parts are delivered to where they’re needed most.
      That leads us to our next stop—NTN’s Mt. Prospect, Ill., location. There, we take a close look at the company’s focus on manufacturing high-quality products. NTN also discusses the importance of AAPEX as a platform to showcase new products and to connect with customers. Then, it’s back to Michigan, and Tamrox Automotive in Jackson, Mich., for an NTN wheel bearing replacement. Watch the video for a demonstration of the process and for insights on customer service and technician retention.
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • Dorman Products
      Why don’t you keep gloves in your car’s glove box?
      By Dorman Products
      Why don’t you keep gloves in your car’s glove box?
    • Counterman
      Getting to Know Driveshaft Couplers
      By Counterman
      The driveshaft coupler might be one of the most overlooked undercar components. It’s known by many other names, such as driveshaft coupling, flexible driveline coupling, driveshaft coupler flex joint and flex disc. 
      You also might know this part as a “giubo,” a term that was coined by its inventor, Antonio Boschi. You’re most likely to be familiar with it if you have customers who own European luxury vehicles, but you’ll also find it on some domestic applications.
      The driveshaft coupler connects the transmission, driveshaft and differential, ensuring a smooth transfer of rotational motion and optimal road performance. 
      You can think of the driveshaft coupler as a vibration dampener. Whenever the transmission transfers power to the differential, the driveshaft coupler loads up to dampen the vibrations, and it prevents driveline misalignments. On a Mercedes, you’re likely to find two driveshaft couplers: one in the front and one in the back.  But you also might encounter this component on a number of other makes and models, including late-model and classic applications.
      Driveshaft couplers also can help compensate for misalignments.  Vehicles are subject to various forces and flexing while in motion, leading to potential misalignments in the drivetrain. Driveshaft couplers can flex to accommodate these misalignments, ensuring continuous power transmission without undue stress on other components.
      The design of a driveshaft coupler must account for several factors, including torque requirements, rotational speeds, temperature ranges and the types of loads (static, dynamic, shock) it will encounter. The materials used – such as rubber, polyurethane or advanced composites – are selected based on their ability to provide flexibility, durability and resistance to wear, heat and chemical exposure.
      Rubber is commonly used for its excellent vibration-dampening properties and flexibility, while polyurethane offers greater durability and resistance to oils and chemicals, albeit with a slight increase in transmitted vibration.
      Driveshaft couplers tend to last a long time. But, given that they’re called into action every time the throttle opens or closes or a gear change occurs, they’re not invincible. While driveshaft couplers are designed for durability, they are, by nature, wear items. Over time, the stress of torque transmission, exposure to environmental elements and the constant flexing can lead to material degradation.
      As a driveshaft coupler wears out, it loses its ability to absorb vibrations and reduce shock forces. When that occurs, drivers and passengers are going to feel it. Symptoms include vibrations or a clunking sound emanating from underneath the vehicle, which might get worse as the vehicle accelerates. A rough shifting feeling when putting the vehicle in drive or reverse is another potential sign of a failing flex disc.
      Why are driveshaft couplers more prevalent on European vehicles? Well, there are several explanations. One is that European automakers prioritize precision engineering, ride quality and handling in their vehicle designs. The use of driveshaft couplers aligns with this philosophy, as these components enhance driveline smoothness and absorb vibrations, leading to a more comfortable and refined driving experience. Plus, European drivers tend to have high expectations regarding vehicle dynamics and comfort, and driveshaft couplers ensure smoother power delivery and reduce NVH levels. 
      Also, European cars – especially luxury and performance models – frequently feature rear-wheel-drive or all-wheel-drive configurations, which inherently require more complex drivetrain layouts. Driveshaft couplers are essential in these setups to manage the alignment and movement between the transmission, driveshaft and differential.
      The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view
    • Dorman Products
      TECHNICIAN CHALLENGE: The Mystery Box
      By Dorman Products
      TECHNICIAN CHALLENGE: The Mystery Box
    • NAPA
      Building Your First Garage Tool Box
      By NAPA
      There comes a point in a DIYer’s life when it is time to put down some wrenching roots in the form of a garage tool box. You may have walked into a friend’s garage or workshop and been in awe of a tool box the size of a tractor trailer. But even owners of serious tool investments had to start somewhere building their collection. Here’s how to build a tool box matched to your garage and your project needs.
      Consider The Space
      Before you start to build your own tool box you need to take stock of your situation. Your available garage space is going to guide your tool box options. Take time to measure the spaces you are considering to place a tool box, including overhead height limitations. Some tool boxes have hinged lids so you need to account for overhead space if you plan on opening it. If you are planning on placing the tool box on a table or shelf, make sure it is well reinforced to handle the weight of a fully loaded box. 
      Now that you know what kind of space you have available, let’s look at how to build a tool box that suits your needs.
      Workbench Top Tool Box link hidden, please login to view
      Starting small is perfectly fine. A good starting point can be a
      link hidden, please login to view with drawers. It fits easily on a shelf or a work bench while giving your tools a home base. This is a great step between a portable tool kit and a dedicated garage tool box because it can still be picked up and taken along for a mobile repair.  When the time comes to grow your storage space a great next step is adding a rolling bottom base cabinet and simply dropping your current portable tool box on top.
      Rolling Cart Tool Box
      Sometimes a good starter garage tool box is a
      link hidden, please login to view. This is especially true if you need to tuck your tools away in a corner when not in use or if your workspace isn’t always in the same place. If you find yourself working in the driveway one day and in the garage the next day, having a rolling tool cart makes sense. The key here is flexibility and mobility. Nice big casters make for easy rolling on uneven surfaces and across expansion joints. Most rolling tool carts are open at the bottom making a great place to store bulky items like jack stands or work lights and cords. The top doubles as a workbench where you can lay out components and stage tools. Depending on the layout there may be an open storage space under a hinged top, which is great for storing sockets and wrenches. There will likely only be three or four drawers, so you will need to be thoughtful about what tools you need for your projects. But the best part about a rolling cart is that it is always handy no matter how big your tool collection. Even if you graduate to a monster technician box, a rolling cart is the perfect portable job organizer. Stacked Chest Tool Box
      If you have been collecting tools for years you may have already amassed quite a stack of tool bags, molded cases, tool rolls, and more filled with tools. If it is time for your nomadic tool collection to find a home, a stacked tool chest may be just the thing. This is the classic two-piece setup most people picture when you think of a mechanic’s shop. A
      link hidden, please login to view with drawers with a separate link hidden, please login to view on top are nearly universal. The key with this combination is drawer space, lots and lots of drawer space. This lets you split out all those tools into their own spot so you don’t have to dig through them anymore.  Hybrid Tool Box
      For some people there will always be the need to take your tools on the road. Luckily Milwaukee’s PACKOUT system lets you build a tool box kit that is perfectly suited to your needs at home or on the go. Pick up a
      link hidden, please login to view and a link hidden, please login to view for the perfect hybrid home-travel tool box. The PACKOUT modular storage system work like building blocks allowing you to create an entire wall of tool storage that is ready to go when necessary. Get Organized
      No matter which tool box you choose you will want to keep things orderly. Organization will come down to your own preferences, but with your new found tool storage space it is recommended to label the drawers to cut down on search time. You can also buy or build
      link hidden, please login to viewto help keep things in their place. Check out all the
      link hidden, please login to viewavailable on link hidden, please login to view, or trust one of our 17,000 link hidden, please login to view for routine maintenance and repairs. For more information how to build your first garage tool box, chat with a knowledgeable expert at your link hidden, please login to view. Photo courtesy of
      link hidden, please login to view. The post
      link hidden, please login to view appeared first on link hidden, please login to view.
      link hidden, please login to view

×
×
  • Create New...